
Fig.24 Environment Sensors - NetFeeler Lite
2.2 Configuration
Sub-Menu :
2.2.1 UPS Configuration
2.2.2 UPS On/Off Schedule
2.2.3 Network
2.2.4 SNMP
2.2.5 Email
2.2.6 WEB/Telnet
2.2.7 System Time
2.2.8 NetFeeler Lite
2.2.9 Language
Please set each parameter correctly, so that Netagent would operates
properly.
Note: This page’s selection would differ according to the differnent interface of the UPS.
2.2.1 UPS Configuration
This page is to set the UPS configuration. Any wrong settings will cause
incorrect display values or disconnection between the UPS and NetAgent.
UPS Properties
UPS Communication Type
This section is to set up the communication interface of the UPS. (eg. Contact
Closure/RS232/3 phase etc.) Please refer to the UPS manual to set the correct
communication type. Any wrong settings will cause disconnection between the UPS
and NetAgent.
UPS Rating Voltage(V)
This section is to set the UPS Rating Voltage. (Unit: Volt) Please refer to the UPS
manual.
Number of Battery
This is to set the UPS battery unit number. Please refer to the UPS manual.
Battery Charge Voltage
This section is to set the UPS battery Charge Voltage. (Unit: Volt) Please refer to the
UPS manual.
21
Comentários a estes Manuais